Towns · Town · ML5

Plot levels in Coatbridge

Buying a building plot in or around Coatbridge? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.

Source: Scottish Government LiDAR for Scotland Phase 5, flown 2021; typical ±0.13 m on open ground in our tests. Flown 5 years ago; work done since then will not show.

What the open data says about Coatbridge

Across the Coatbridge area (21.57 km² from the OS Open Names extent), open LiDAR covers 100% of the ground. The best survey for most of it is LiDAR for Scotland Phase 5, flown 2021 on a 0.5 m grid.

That survey is about 5 years old. Plots in Coatbridge that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.

Most of the ground across the area (96% of readings) lies between 48.1 m and 116.6 m above Ordnance Datum, with a median of 84.6 m. The extremes (30.5 m to 153.9 m) can include water surfaces and data edges, so we don't quote them as ground levels.

Much of Coatbridge is gently sloping, with steeper banks in places (23.1% over 1 in 10). Two plots a street apart can differ a lot, so the plot-level contours matter more than the town average.

Tiles from LiDAR for Scotland Phase 3 (flown 2015–2019); LiDAR for Scotland Phase 2 (DTM only) (flown 2012–2014); LiDAR for Scotland Phase 1 (flown 2011–2012) also overlap the Coatbridge extent, but where surveys overlap the report uses the best one, as above.

Fitting a plane through the 10 m levels, the ground across Coatbridge falls generally towards the south-west at about 9.3 m per km (roughly 1 in 108). The lowest tenth of the ground lies mostly to the south-west, and the highest tenth lies mostly to the north-east.

About 24.2% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 9.2°.

On SEPA's flood maps (medium likelihood), 5.6% of the Coatbridge extent is inside the river flood extent, 11.8% inside the surface water extent and none inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.

Historic Environment Scotland has 59 listed building records in the extent (36 category B, 23 category C), and 5 scheduled monuments and 2 conservation areas overlapping it. A plot report lists any that touch or sit near your boundary.

NatureScot protected areas overlapping the extent: Woodend Loch (SSSI).

58.1% of the extent lies within the Coal Authority's Development High Risk Area (where recorded past coal mining features are present).

Nearest towns with pages here: Airdrie, 3 km east, median ground about 55 m higher; Bellshill, 4.9 km south, median ground about 16 m lower; Uddingston, 5.8 km south-west, median ground about 37 m lower; Motherwell, 8.4 km south, median ground about 6 m lower.

Sampled every 10 m, the typical slope is 3°, and 23.1% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.

Area checked21.57 km² (OS Open Names extent, at most 6 km across)
LiDAR coverage100.0%
Best surveyLiDAR for Scotland Phase 5, flown 2021, 0.5 m grid (100.0%); typical ±0.13 m
Ground levelsmostly 48.1–116.6 m AOD (2nd–98th percentile), median 84.6 m
Slope (10 m sample)median 3.0°, 90th percentile 9.2°, 23.1% steeper than 1 in 10
Overall falltowards the south-west, about 9.3 m per km
SEPA flood maps (medium likelihood)river 5.6%, surface water 11.8%, coastal 0.0% of the extent (awareness only, not a flood risk assessment)
HES records in extent59 listed buildings (A 0, B 36, C 23), 5 scheduled monuments, 2 conservation areas, 0 gardens and designed landscapes
NatureScot protected areas1
Coal Authority high risk area58.1% of the extent

Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.

What a plot report shows

Check a plot in Coatbridge

Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.

Nearby towns

Airdrie · Bellshill · Uddingston · Motherwell

Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.