Buying a building plot in or around Hamilton? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.
Across the Hamilton area (22.5 km² from the OS Open Names extent), open LiDAR covers 99.5% of the ground. The best survey for most of it is LiDAR for Scotland Phase 3, flown 2015–2019 on a 0.5 m grid (84.9% of the area).
Other parts use LiDAR for Scotland Phase 5, flown 2021 (11.9%); LiDAR for Scotland Phase 1, flown 2011–2012 (2.5%); LiDAR for Scotland Phase 2 (DTM only), flown 2012–2014 (0.1%). A plot near the join between surveys may draw on both; the report shows which survey covers each part of your boundary.
That survey is about 7 years old. Plots in Hamilton that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.
Most of the ground across the area (96% of readings) lies between 20.6 m and 187 m above Ordnance Datum, with a median of 64.9 m. The extremes (17.9 m to 204.5 m) can include water surfaces and data edges, so we don't quote them as ground levels.
Much of Hamilton is gently sloping, with steeper banks in places (24% over 1 in 10). Two plots a street apart can differ a lot, so the plot-level contours matter more than the town average.
Fitting a plane through the 10 m levels, the ground across Hamilton falls generally towards the north-east at about 28.5 m per km (roughly 1 in 35). The lowest tenth of the ground lies mostly to the north-east, and the highest tenth lies mostly to the south-west.
About 25.3% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 10.8°.
On SEPA's flood maps (medium likelihood), 17.1% of the Hamilton extent is inside the river flood extent, 12.5% inside the surface water extent and none inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.
Historic Environment Scotland has 202 listed building records in the extent (15 category A, 102 category B, 85 category C), and 7 scheduled monuments, 4 conservation areas and 2 inventory gardens and designed landscapes overlapping it. A plot report lists any that touch or sit near your boundary.
NatureScot protected areas overlapping the extent: Hamilton High Parks (SSSI); Hamilton Low Parks (SSSI); Clyde Valley Woods (SAC); Clyde Valley Woodlands (National Nature Reserve).
1.4% of the extent lies within the Coal Authority's Development High Risk Area (where recorded past coal mining features are present).
Nearest towns with pages here: Motherwell, 2.9 km north-east, median ground about 14 m higher; Bellshill, 4.8 km north, median ground about 3 m higher; Larkhall, 5.8 km south-east, median ground about 41 m higher; Uddingston, 5.8 km north-west, median ground about 18 m lower.
Sampled every 10 m, the typical slope is 2.9°, and 24% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.
| Area checked | 22.5 km² (OS Open Names extent, at most 6 km across) |
|---|---|
| LiDAR coverage | 99.5% |
| Best survey | LiDAR for Scotland Phase 3, flown 2015–2019, 0.5 m grid (84.9%); typical ±0.14 m |
| Also used | LiDAR for Scotland Phase 5, flown 2021, 0.5 m grid (11.9%); typical ±0.13 m |
| Also used | LiDAR for Scotland Phase 1, flown 2011–2012, 1.000001500000013 m grid (2.5%); typical ±0.15 m |
| Also used | LiDAR for Scotland Phase 2 (DTM only), flown 2012–2014, 1.0 m grid (0.1%); typical ±0.15 m |
| Ground levels | mostly 20.6–187.0 m AOD (2nd–98th percentile), median 64.9 m |
| Slope (10 m sample) | median 2.9°, 90th percentile 10.8°, 24.0% steeper than 1 in 10 |
| Overall fall | towards the north-east, about 28.5 m per km |
| SEPA flood maps (medium likelihood) | river 17.1%, surface water 12.5%, coastal 0.0% of the extent (awareness only, not a flood risk assessment) |
| HES records in extent | 202 listed buildings (A 15, B 102, C 85), 7 scheduled monuments, 4 conservation areas, 2 gardens and designed landscapes |
| NatureScot protected areas | 4 |
| Coal Authority high risk area | 1.4% of the extent |
Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.
Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.
Motherwell · Bellshill · Larkhall · Uddingston
Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.