Buying a building plot in or around Linlithgow? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.
Across the Linlithgow area (10.97 km² from the OS Open Names extent), open LiDAR covers 100% of the ground. The best survey for most of it is LiDAR for Scotland Phase 5, flown 2021 on a 0.5 m grid.
That survey is about 5 years old. Plots in Linlithgow that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.
Most of the ground across the area (96% of readings) lies between 34.5 m and 129.4 m above Ordnance Datum, with a median of 66.3 m. The extremes (23.6 m to 143.6 m) can include water surfaces and data edges, so we don't quote them as ground levels.
That makes Linlithgow steep ground by Scottish town standards: about a quarter or more of it falls faster than 1 in 10. On slopes like that, the cut-and-fill estimate and the fall across the plot are often the numbers that change a build budget most, so they're worth seeing before an offer.
Tiles from LiDAR for Scotland Phase 4 (flown 2020); Historic Environment Scotland LiDAR (flown 2010–2017); LiDAR for Scotland Phase 2 (DTM only) (flown 2012–2014); LiDAR for Scotland Phase 1 (flown 2011–2012) also overlap the Linlithgow extent, but where surveys overlap the report uses the best one, as above.
Fitting a plane through the 10 m levels, the ground across Linlithgow falls generally towards the north-west at about 24.8 m per km (roughly 1 in 40). The lowest tenth of the ground lies mostly to the west, and the highest tenth lies mostly to the south-east.
About 18.8% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 10.4°.
On SEPA's flood maps (medium likelihood), 6.5% of the Linlithgow extent is inside the river flood extent, 8.9% inside the surface water extent and none inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.
Historic Environment Scotland has 199 listed building records in the extent (10 category A, 95 category B, 94 category C), and 2 scheduled monuments and 2 conservation areas overlapping it. A plot report lists any that touch or sit near your boundary.
NatureScot protected areas overlapping the extent: Linlithgow Loch (SSSI).
0.4% of the extent lies within the Coal Authority's Development High Risk Area (where recorded past coal mining features are present).
Nearest towns with pages here: Bo'ness, 4.5 km north, median ground about 18 m lower; Bathgate, 8.7 km south, median ground about 87 m higher; Grangemouth, 8.9 km north-west, median ground about 62 m lower; Culross, 9 km north, median ground about 38 m lower.
Sampled every 10 m, the typical slope is 3.9°, and 32.8% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.
| Area checked | 10.97 km² (OS Open Names extent, at most 6 km across) |
|---|---|
| LiDAR coverage | 100.0% |
| Best survey | LiDAR for Scotland Phase 5, flown 2021, 0.5 m grid (100.0%); typical ±0.13 m |
| Ground levels | mostly 34.5–129.4 m AOD (2nd–98th percentile), median 66.3 m |
| Slope (10 m sample) | median 3.9°, 90th percentile 10.4°, 32.8% steeper than 1 in 10 |
| Overall fall | towards the north-west, about 24.8 m per km |
| SEPA flood maps (medium likelihood) | river 6.5%, surface water 8.9%, coastal 0.0% of the extent (awareness only, not a flood risk assessment) |
| HES records in extent | 199 listed buildings (A 10, B 95, C 94), 2 scheduled monuments, 2 conservation areas, 0 gardens and designed landscapes |
| NatureScot protected areas | 1 |
| Coal Authority high risk area | 0.4% of the extent |
Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.
Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.
Bo'ness · Bathgate · Grangemouth · Culross
Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.