Buying a building plot in or around Monifieth? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.
Across the Monifieth area (4.13 km² from the OS Open Names extent), open LiDAR covers 81.3% of the ground. The best survey for most of it is LiDAR for Scotland Phase 4, flown 2020 on a 0.5 m grid (45.1% of the area).
Other parts use Coastal LiDAR 2025–2026, flown 2025–2026 (20.5%); Scotland National LiDAR Programme, flown 2025–2026 (15.7%). A plot near the join between surveys may draw on both; the report shows which survey covers each part of your boundary.
That survey is about 6 years old. Plots in Monifieth that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.
Most of the ground across the area (96% of readings) lies between 0 m and 62.3 m above Ordnance Datum, with a median of 22.4 m. The extremes (-0.9 m to 71.3 m) can include water surfaces and data edges, so we don't quote them as ground levels.
Much of Monifieth is gently sloping, with steeper banks in places (16% over 1 in 10). Two plots a street apart can differ a lot, so the plot-level contours matter more than the town average.
Parts of the area are less than 5 m above Ordnance Datum, so a plot report here also lists whether SEPA's mapped flood extents touch the boundary. That is a map layer, not a flood risk assessment.
Tiles from LiDAR for Scotland Phase 1 (flown 2011–2012) also overlap the Monifieth extent, but where surveys overlap the report uses the best one, as above.
Fitting a plane through the 10 m levels, the ground across Monifieth falls generally towards the south-east at about 31.1 m per km (roughly 1 in 32). The lowest tenth of the ground lies mostly to the south-east, and the highest tenth lies mostly to the north-west.
About 31.4% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 7.4°.
On SEPA's flood maps (medium likelihood), 5.8% of the Monifieth extent is inside the river flood extent, 2.2% inside the surface water extent and 9.8% inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.
Historic Environment Scotland has 37 listed building records in the extent (1 category A, 24 category B, 12 category C), and no scheduled monuments or conservation areas overlapping it. A plot report lists any that touch or sit near your boundary.
NatureScot protected areas overlapping the extent: Barry Links (SSSI); Monifieth Bay (SSSI); Firth of Tay and Eden Estuary (SAC); Firth of Tay and Eden Estuary (SPA); Outer Firth of Forth and St Andrews Bay Complex (SPA); Firth of Tay and Eden Estuary (Ramsar site).
None of the Monifieth extent is within the Coal Authority's Development High Risk Area.
Nearest towns with pages here: Broughty Ferry, 4.1 km south-west, median ground about 7 m higher; Tayport, 5.7 km south-west, median ground about 11 m lower; Carnoustie, 6.9 km east, median ground about the same; Newport-on-Tay, 9.1 km south-west, median ground about 15 m higher.
Sampled every 10 m, the typical slope is 2.4°, and 16% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.
| Area checked | 4.13 km² (OS Open Names extent, at most 6 km across) |
|---|---|
| LiDAR coverage | 81.3% |
| Best survey | LiDAR for Scotland Phase 4, flown 2020, 0.5 m grid (45.1%); typical ±0.12 m |
| Also used | Coastal LiDAR 2025–2026, flown 2025–2026, 0.5 m grid (20.5%); typical ±0.15 m |
| Also used | Scotland National LiDAR Programme, flown 2025–2026, 0.5 m grid (15.7%); typical ±0.14 m |
| Ground levels | mostly 0.0–62.3 m AOD (2nd–98th percentile), median 22.4 m |
| Slope (10 m sample) | median 2.4°, 90th percentile 7.4°, 16.0% steeper than 1 in 10 |
| Overall fall | towards the south-east, about 31.1 m per km |
| SEPA flood maps (medium likelihood) | river 5.8%, surface water 2.2%, coastal 9.8% of the extent (awareness only, not a flood risk assessment) |
| HES records in extent | 37 listed buildings (A 1, B 24, C 12), 0 scheduled monuments, 0 conservation areas, 0 gardens and designed landscapes |
| NatureScot protected areas | 6 |
| Coal Authority high risk area | 0.0% of the extent |
Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.
Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.
Broughty Ferry · Tayport · Carnoustie · Newport-on-Tay
Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.