Towns · Town · PA34

Plot levels in Oban

Buying a building plot in or around Oban? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.

Source: Scottish Government LiDAR for Scotland Phase 1, flown 2011–2012; typical ±0.15 m on open ground in our tests. Flown 14 years ago; work done since then will not show.

What the open data says about Oban

Across the Oban area (12.66 km² from the OS Open Names extent), open LiDAR covers 88.5% of the ground. The best survey for most of it is LiDAR for Scotland Phase 1, flown 2011–2012 on a 1 m grid.

That survey is about 14 years old. Plots in Oban that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.

Most of the ground across the area (96% of readings) lies between -0.6 m and 137.9 m above Ordnance Datum, with a median of 53.7 m. The extremes (-0.8 m to 165.5 m) can include water surfaces and data edges, so we don't quote them as ground levels.

That makes Oban steep ground by Scottish town standards: about a quarter or more of it falls faster than 1 in 10. On slopes like that, the cut-and-fill estimate and the fall across the plot are often the numbers that change a build budget most, so they're worth seeing before an offer.

Parts of the area are less than 5 m above Ordnance Datum, so a plot report here also lists whether SEPA's mapped flood extents touch the boundary. That is a map layer, not a flood risk assessment.

Fitting a plane through the 10 m levels, the ground across Oban falls generally towards the west at about 32.1 m per km (roughly 1 in 31). The lowest tenth of the ground lies mostly to the north-west, and the highest tenth lies mostly to the north-east.

About 20.5% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 25.3°.

On SEPA's flood maps (medium likelihood), 2.7% of the Oban extent is inside the river flood extent, 9.5% inside the surface water extent and 13.3% inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.

Historic Environment Scotland has 106 listed building records in the extent (1 category A, 45 category B, 60 category C), and 3 scheduled monuments overlapping it. A plot report lists any that touch or sit near your boundary.

NatureScot protected areas overlapping the extent: Inner Hebrides and the Minches (SAC).

None of the Oban extent is within the Coal Authority's Development High Risk Area.

Nearest towns with pages here: Inbhir Aora, 31.9 km south-east, median ground about 38 m lower; Ceann Loch Gilb, 41.8 km south, median ground about 43 m lower; Tobermory, 43.6 km north-west; An Gearasdan, 50.7 km north-east, median ground about 27 m lower.

Sampled every 10 m, the typical slope is 8.2°, and 59.8% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.

Area checked12.66 km² (OS Open Names extent, at most 6 km across)
LiDAR coverage88.5%
Best surveyLiDAR for Scotland Phase 1, flown 2011–2012, 1.000002600000007 m grid (88.5%); typical ±0.15 m
Ground levelsmostly -0.6–137.9 m AOD (2nd–98th percentile), median 53.7 m
Slope (10 m sample)median 8.2°, 90th percentile 25.3°, 59.8% steeper than 1 in 10
Overall falltowards the west, about 32.1 m per km
SEPA flood maps (medium likelihood)river 2.7%, surface water 9.5%, coastal 13.3% of the extent (awareness only, not a flood risk assessment)
HES records in extent106 listed buildings (A 1, B 45, C 60), 3 scheduled monuments, 0 conservation areas, 0 gardens and designed landscapes
NatureScot protected areas1
Coal Authority high risk area0.0% of the extent

Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.

What a plot report shows

Check a plot in Oban

Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.

Nearby towns

Inbhir Aora · Ceann Loch Gilb · Tobermory · An Gearasdan

Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.