Towns · Town · EH45

Plot levels in Peebles

Buying a building plot in or around Peebles? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.

Source: Scottish Government LiDAR for Scotland Phase 3, flown 2015–2019; typical ±0.14 m on open ground in our tests. Flown 7 years ago; work done since then will not show.

What the open data says about Peebles

Across the Peebles area (7.77 km² from the OS Open Names extent), open LiDAR covers 99.9% of the ground. The best survey for most of it is LiDAR for Scotland Phase 3, flown 2015–2019 on a 0.5 m grid.

That survey is about 7 years old. Plots in Peebles that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.

Most of the ground across the area (96% of readings) lies between 156.2 m and 308.9 m above Ordnance Datum, with a median of 181.6 m. The extremes (153.5 m to 344.8 m) can include water surfaces and data edges, so we don't quote them as ground levels.

That makes Peebles steep ground by Scottish town standards: about a quarter or more of it falls faster than 1 in 10. On slopes like that, the cut-and-fill estimate and the fall across the plot are often the numbers that change a build budget most, so they're worth seeing before an offer.

Higher ground reaches about 308.9 m, so exposure and access gradients can matter on the upper plots.

Tiles from LiDAR for Scotland Phase 1 (flown 2011–2012) also overlap the Peebles extent, but where surveys overlap the report uses the best one, as above.

Fitting a plane through the 10 m levels, the ground across Peebles falls generally towards the south-west at about 21.1 m per km (roughly 1 in 47). The lowest tenth of the ground lies mostly to the south-east, and the highest tenth lies mostly to the north-east.

About 19.4% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 17.7°.

On SEPA's flood maps (medium likelihood), 14.9% of the Peebles extent is inside the river flood extent, 5.7% inside the surface water extent and none inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.

Historic Environment Scotland has 209 listed building records in the extent (3 category A, 83 category B, 123 category C), and 6 scheduled monuments and 1 conservation area overlapping it. A plot report lists any that touch or sit near your boundary.

NatureScot protected areas overlapping the extent: River Tweed (SSSI); River Tweed (SAC).

None of the Peebles extent is within the Coal Authority's Development High Risk Area.

Nearest towns with pages here: Innerleithen, 8.6 km south-east, median ground about 8 m lower; Penicuik, 20.1 km north, median ground about 20 m higher; Biggar, 21.4 km west, median ground about 36 m higher; Galashiels, 24.3 km east, median ground about 4 m lower.

Sampled every 10 m, the typical slope is 5.2°, and 47% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.

Area checked7.77 km² (OS Open Names extent, at most 6 km across)
LiDAR coverage99.9%
Best surveyLiDAR for Scotland Phase 3, flown 2015–2019, 0.5 m grid (99.9%); typical ±0.14 m
Ground levelsmostly 156.2–308.9 m AOD (2nd–98th percentile), median 181.6 m
Slope (10 m sample)median 5.2°, 90th percentile 17.7°, 47.0% steeper than 1 in 10
Overall falltowards the south-west, about 21.1 m per km
SEPA flood maps (medium likelihood)river 14.9%, surface water 5.7%, coastal 0.0% of the extent (awareness only, not a flood risk assessment)
HES records in extent209 listed buildings (A 3, B 83, C 123), 6 scheduled monuments, 1 conservation areas, 0 gardens and designed landscapes
NatureScot protected areas2
Coal Authority high risk area0.0% of the extent

Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.

What a plot report shows

Check a plot in Peebles

Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.

Nearby towns

Innerleithen · Penicuik · Biggar · Galashiels

Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.