Buying a building plot in or around Troon? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.
Across the Troon area (22.22 km² from the OS Open Names extent), open LiDAR covers 81.4% of the ground. The best survey for most of it is Coastal LiDAR 2025–2026, flown 2025–2026 on a 0.5 m grid (36.1% of the area).
Other parts use LiDAR for Scotland Phase 6, flown 2022 (21.1%); LiDAR for Scotland Phase 1, flown 2011–2012 (16.4%); LiDAR for Scotland Phase 4, flown 2020 (7.8%). A plot near the join between surveys may draw on both; the report shows which survey covers each part of your boundary.
That survey is recent (about 0 years old), but anything built or dug since still won't show. The flight date is on every page of the report.
Most of the ground across the area (96% of readings) lies between -0.9 m and 49.3 m above Ordnance Datum, with a median of 8.6 m. The extremes (-4.7 m to 75.1 m) can include water surfaces and data edges, so we don't quote them as ground levels.
Most of Troon is fairly flat at this scale (only 7.5% steeper than 1 in 10). On flat plots the useful questions are usually drainage falls and how the plot sits against the road and neighbours, which the spot levels help answer.
Parts of the area are less than 5 m above Ordnance Datum, so a plot report here also lists whether SEPA's mapped flood extents touch the boundary. That is a map layer, not a flood risk assessment.
Fitting a plane through the 10 m levels, the ground across Troon falls generally towards the west at about 8.9 m per km (roughly 1 in 112). The lowest tenth of the ground lies mostly to the west, and the highest tenth lies mostly to the north-east.
About 60.6% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 4.8°.
On SEPA's flood maps (medium likelihood), 1.5% of the Troon extent is inside the river flood extent, 2.9% inside the surface water extent and 21.8% inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.
Historic Environment Scotland has 122 listed building records in the extent (4 category A, 63 category B, 55 category C), and 1 scheduled monument and 2 conservation areas overlapping it. A plot report lists any that touch or sit near your boundary.
NatureScot protected areas overlapping the extent: Troon Golf Links and Foreshore (SSSI).
0.4% of the extent lies within the Coal Authority's Development High Risk Area (where recorded past coal mining features are present).
Nearest towns with pages here: Prestwick, 6 km south-east, median ground about the same; Irvine, 8 km north, median ground about 3 m higher; Ayr, 9.8 km south, median ground about 4 m higher; Stevenston, 12.3 km north-west, median ground about the same.
Sampled every 10 m, the typical slope is 1°, and 7.5% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.
| Area checked | 22.22 km² (OS Open Names extent, at most 6 km across) |
|---|---|
| LiDAR coverage | 81.4% |
| Best survey | Coastal LiDAR 2025–2026, flown 2025–2026, 0.5 m grid (36.1%); typical ±0.15 m |
| Also used | LiDAR for Scotland Phase 6, flown 2022, 0.5 m grid (21.1%); typical ±0.13 m |
| Also used | LiDAR for Scotland Phase 1, flown 2011–2012, 1.00000260000024 m grid (16.4%); typical ±0.15 m |
| Also used | LiDAR for Scotland Phase 4, flown 2020, 0.5 m grid (7.8%); typical ±0.12 m |
| Ground levels | mostly -0.9–49.3 m AOD (2nd–98th percentile), median 8.6 m |
| Slope (10 m sample) | median 1.0°, 90th percentile 4.8°, 7.5% steeper than 1 in 10 |
| Overall fall | towards the west, about 8.9 m per km |
| SEPA flood maps (medium likelihood) | river 1.5%, surface water 2.9%, coastal 21.8% of the extent (awareness only, not a flood risk assessment) |
| HES records in extent | 122 listed buildings (A 4, B 63, C 55), 1 scheduled monuments, 2 conservation areas, 0 gardens and designed landscapes |
| NatureScot protected areas | 1 |
| Coal Authority high risk area | 0.4% of the extent |
Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.
Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.
Prestwick · Irvine · Ayr · Stevenston
Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.