Buying a building plot in or around Galston? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.
Across the Galston area (2.48 km² from the OS Open Names extent), open LiDAR covers 100% of the ground. The best survey for most of it is LiDAR for Scotland Phase 4, flown 2020 on a 0.5 m grid (99.8% of the area).
Other parts use LiDAR for Scotland Phase 1, flown 2011–2012 (0.2%). A plot near the join between surveys may draw on both; the report shows which survey covers each part of your boundary.
That survey is about 6 years old. Plots in Galston that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.
Most of the ground across the area (96% of readings) lies between 42.3 m and 90 m above Ordnance Datum, with a median of 60.6 m. The extremes (40.6 m to 98.4 m) can include water surfaces and data edges, so we don't quote them as ground levels.
Much of Galston is gently sloping, with steeper banks in places (24.2% over 1 in 10). Two plots a street apart can differ a lot, so the plot-level contours matter more than the town average.
Tiles from LiDAR for Scotland Phase 6 (flown 2022) also overlap the Galston extent, but where surveys overlap the report uses the best one, as above.
Fitting a plane through the 10 m levels, the ground across Galston falls generally towards the north at about 30.2 m per km (roughly 1 in 33). The lowest tenth of the ground lies mostly to the north-west, and the highest tenth lies mostly to the south-east.
About 23.2% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 8.5°.
On SEPA's flood maps (medium likelihood), 12.9% of the Galston extent is inside the river flood extent, 12.5% inside the surface water extent and none inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.
Historic Environment Scotland has 20 listed building records in the extent (1 category A, 6 category B, 13 category C), and 1 conservation area and 1 inventory garden and designed landscape overlapping it. A plot report lists any that touch or sit near your boundary.
No NatureScot SSSI, SAC, SPA, Ramsar site or National Nature Reserve overlaps the Galston extent.
16.5% of the extent lies within the Coal Authority's Development High Risk Area (where recorded past coal mining features are present).
Nearest towns with pages here: Newmilns, 3.6 km east, median ground about 31 m higher; Darvel, 6.3 km east, median ground about 48 m higher; Kilmarnock, 7.3 km west, median ground about 16 m lower; Stewarton, 12.3 km north-west, median ground about 48 m higher.
Sampled every 10 m, the typical slope is 3.3°, and 24.2% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.
| Area checked | 2.48 km² (OS Open Names extent, at most 6 km across) |
|---|---|
| LiDAR coverage | 100.0% |
| Best survey | LiDAR for Scotland Phase 4, flown 2020, 0.5 m grid (99.8%); typical ±0.12 m |
| Also used | LiDAR for Scotland Phase 1, flown 2011–2012, 1.000002600000007 m grid (0.2%); typical ±0.15 m |
| Ground levels | mostly 42.3–90.0 m AOD (2nd–98th percentile), median 60.6 m |
| Slope (10 m sample) | median 3.3°, 90th percentile 8.5°, 24.2% steeper than 1 in 10 |
| Overall fall | towards the north, about 30.2 m per km |
| SEPA flood maps (medium likelihood) | river 12.9%, surface water 12.5%, coastal 0.0% of the extent (awareness only, not a flood risk assessment) |
| HES records in extent | 20 listed buildings (A 1, B 6, C 13), 0 scheduled monuments, 1 conservation areas, 1 gardens and designed landscapes |
| NatureScot protected areas | 0 |
| Coal Authority high risk area | 16.5% of the extent |
Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.
Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.
Newmilns · Darvel · Kilmarnock · Stewarton
Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.