Towns · Town · KA3

Plot levels in Stewarton

Buying a building plot in or around Stewarton? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.

Source: Scottish Government LiDAR for Scotland Phase 6, flown 2022; typical ±0.13 m on open ground in our tests.

What the open data says about Stewarton

Across the Stewarton area (5.47 km² from the OS Open Names extent), open LiDAR covers 100% of the ground. The best survey for most of it is LiDAR for Scotland Phase 6, flown 2022 on a 0.5 m grid (99.7% of the area).

Other parts use LiDAR for Scotland Phase 4, flown 2020 (0.2%); LiDAR for Scotland Phase 1, flown 2011–2012 (0.1%). A plot near the join between surveys may draw on both; the report shows which survey covers each part of your boundary.

That survey is recent (about 4 years old), but anything built or dug since still won't show. The flight date is on every page of the report.

Most of the ground across the area (96% of readings) lies between 76.3 m and 131.8 m above Ordnance Datum, with a median of 108.2 m. The extremes (69 m to 139.8 m) can include water surfaces and data edges, so we don't quote them as ground levels.

Much of Stewarton is gently sloping, with steeper banks in places (23.1% over 1 in 10). Two plots a street apart can differ a lot, so the plot-level contours matter more than the town average.

Fitting a plane through the 10 m levels, the ground across Stewarton falls generally towards the south at about 14.2 m per km (roughly 1 in 70). The lowest tenth of the ground lies mostly to the south-west, and the highest tenth lies mostly to the north.

About 17.3% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 9.6°.

On SEPA's flood maps (medium likelihood), 5.9% of the Stewarton extent is inside the river flood extent, 6.3% inside the surface water extent and none inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.

Historic Environment Scotland has 33 listed building records in the extent (9 category B, 24 category C), and 1 scheduled monument and 1 conservation area overlapping it. A plot report lists any that touch or sit near your boundary.

No NatureScot SSSI, SAC, SPA, Ramsar site or National Nature Reserve overlaps the Stewarton extent.

0.2% of the extent lies within the Coal Authority's Development High Risk Area (where recorded past coal mining features are present).

Nearest towns with pages here: Kilmarnock, 8 km south, median ground about 64 m lower; Kilwinning, 11.9 km west, median ground about 89 m lower; Irvine, 12.1 km south-west, median ground about 97 m lower; Galston, 12.3 km south-east, median ground about 48 m lower.

Sampled every 10 m, the typical slope is 3.2°, and 23.1% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.

Area checked5.47 km² (OS Open Names extent, at most 6 km across)
LiDAR coverage100.0%
Best surveyLiDAR for Scotland Phase 6, flown 2022, 0.5 m grid (99.7%); typical ±0.13 m
Also usedLiDAR for Scotland Phase 4, flown 2020, 0.5 m grid (0.2%); typical ±0.12 m
Also usedLiDAR for Scotland Phase 1, flown 2011–2012, 1.000002600000007 m grid (0.1%); typical ±0.15 m
Ground levelsmostly 76.3–131.8 m AOD (2nd–98th percentile), median 108.2 m
Slope (10 m sample)median 3.2°, 90th percentile 9.6°, 23.1% steeper than 1 in 10
Overall falltowards the south, about 14.2 m per km
SEPA flood maps (medium likelihood)river 5.9%, surface water 6.3%, coastal 0.0% of the extent (awareness only, not a flood risk assessment)
HES records in extent33 listed buildings (A 0, B 9, C 24), 1 scheduled monuments, 1 conservation areas, 0 gardens and designed landscapes
NatureScot protected areas0
Coal Authority high risk area0.2% of the extent

Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.

What a plot report shows

Check a plot in Stewarton

Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.

Nearby towns

Kilmarnock · Kilwinning · Irvine · Galston

Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.