Towns · Town · PH22

Plot levels in Aviemore

Buying a building plot in or around Aviemore? See how the ground falls and what constraints apply before you commit, using the Scottish Government LiDAR flown over the area and published on the Scottish Remote Sensing Portal.

Source: Scottish Government LiDAR for Scotland Phase 1, flown 2011–2012; typical ±0.15 m on open ground in our tests. Flown 14 years ago; work done since then will not show.

What the open data says about Aviemore

Across the Aviemore area (8.62 km² from the OS Open Names extent), open LiDAR covers 87.1% of the ground. The best survey for most of it is LiDAR for Scotland Phase 1, flown 2011–2012 on a 1 m grid.

That survey is about 14 years old. Plots in Aviemore that have been cleared, filled or built on since then won't show those changes, so the report flags the date at the top of every page and checks for buildings mapped since the flight where it can.

Most of the ground across the area (96% of readings) lies between 205.1 m and 287.7 m above Ordnance Datum, with a median of 216.7 m. The extremes (202.7 m to 357.5 m) can include water surfaces and data edges, so we don't quote them as ground levels.

That makes Aviemore steep ground by Scottish town standards: about a quarter or more of it falls faster than 1 in 10. On slopes like that, the cut-and-fill estimate and the fall across the plot are often the numbers that change a build budget most, so they're worth seeing before an offer.

Higher ground reaches about 287.7 m, so exposure and access gradients can matter on the upper plots.

Fitting a plane through the 10 m levels, the ground across Aviemore falls generally towards the east at about 18 m per km (roughly 1 in 56). The lowest tenth of the ground lies mostly to the south, and the highest tenth lies mostly to the north-west.

About 32% of the 10 m samples are flatter than 1 in 40, while one in ten is steeper than 11.9°.

On SEPA's flood maps (medium likelihood), 20% of the Aviemore extent is inside the river flood extent, 9.8% inside the surface water extent and none inside the coastal extent. The extent is a rectangle round the town, so it can take in foreshore, sea and open ground. These are indicative national maps, not a flood risk assessment; a plot report gives the figures for your own boundary.

Historic Environment Scotland has 11 listed building records in the extent (3 category A, 4 category B, 4 category C), and 2 scheduled monuments and 1 inventory garden and designed landscape overlapping it. A plot report lists any that touch or sit near your boundary.

NatureScot protected areas overlapping the extent: Craigellachie (SSSI); Kinveachy Forest (SSSI); River Spey (SSSI); Kinveachy Forest (SAC); River Spey (SAC); Kinveachy Forest (SPA); and 1 more.

None of the Aviemore extent is within the Coal Authority's Development High Risk Area.

Nearest towns with pages here: Kingussie, 18.3 km south-west, median ground about 25 m higher; Grantown-on-Spey, 20.4 km north-east, median ground about the same; Inverness, 40 km north-west, median ground about 195 m lower; Nairn, 43.8 km north, median ground about 200 m lower.

Sampled every 10 m, the typical slope is 2.6°, and 27.4% of the area is steeper than 1 in 10. A single plot can be much flatter or steeper than this. Its report works at 0.5 m.

Area checked8.62 km² (OS Open Names extent, at most 6 km across)
LiDAR coverage87.1%
Best surveyLiDAR for Scotland Phase 1, flown 2011–2012, 1.0000025000000023 m grid (87.1%); typical ±0.15 m
Ground levelsmostly 205.1–287.7 m AOD (2nd–98th percentile), median 216.7 m
Slope (10 m sample)median 2.6°, 90th percentile 11.9°, 27.4% steeper than 1 in 10
Overall falltowards the east, about 18.0 m per km
SEPA flood maps (medium likelihood)river 20.0%, surface water 9.8%, coastal 0.0% of the extent (awareness only, not a flood risk assessment)
HES records in extent11 listed buildings (A 3, B 4, C 4), 2 scheduled monuments, 0 conservation areas, 1 gardens and designed landscapes
NatureScot protected areas7
Coal Authority high risk area0.0% of the extent

Read from the open LiDAR at a 10 m sample on 2026-10-23; local data checked 2026-10-23. A plot report reads the same data at 0.5 m for your boundary only.

What a plot report shows

Check a plot in Aviemore

Accuracy. We test Scottish LiDAR against independent survey overlaps and Ordnance Survey levelled trig pillars: heights are ±0.14 m typical on open ground (95% within ±0.28 m). Results by survey phase.

Nearby towns

Kingussie · Grantown-on-Spey · Inverness · Nairn

Place names and extents: OS Open Names. Contains OS data © Crown copyright and database right 2026. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. ©SEPA 2025; this SEPA product is licensed under the Open Government Licence version 3.0. Third-party data attribution statements: https://www.sepa.org.uk/media/5zidnja5/sepa_flood_maps_data_attribution_statements.pdf (SEPA flood maps are indicative and not suitable for individual properties). Contains Historic Environment Scotland and Ordnance Survey data © Historic Environment Scotland - Scottish Charity No. SC045925 © Crown copyright and database right 2026. Open Government Licence v3. Contains NatureScot information licensed under the Open Government Licence v3. Contains Mining Remediation Authority (formerly the Coal Authority) data, Open Government Licence v3. See data licences.