Contours, spot levels and slope for a plot anywhere in North Ayrshire that the national LiDAR covers. Draw your boundary and see the ground in minutes.
Published Scottish LiDAR covers all of North Ayrshire. The best survey available here is Scotland National LiDAR Programme, flown 2025–2026 on a 0.5 m grid. It covers 48.7% of the area.
The rest is covered by LiDAR for Scotland Phase 6 (2022, 51.3%). A report always uses the best survey for your boundary and says which one.
Of the 7 towns we have pages for here, Millport sits lowest (median ground about 5.8 m above Ordnance Datum) and Saltcoats highest (about 22.3 m).
Largs has the most ground steeper than 1 in 10 (31.6% of its area), Saltcoats the least (9.5%). Plots a street apart can still differ a lot.
Check a plot in North Ayrshire
| Council area | 885 km² |
|---|---|
| Inside published LiDAR tiles | 100.0% |
| Best survey | Scotland National LiDAR Programme, flown 2025–2026, 0.5 m grid (48.7% of the area); typical ±0.14 m on open ground |
| Also used | LiDAR for Scotland Phase 6, flown 2022, 0.5 m grid (51.3% of the area); typical ±0.13 m on open ground |
Shares are of the council's land area inside published DTM tiles on the Scottish Remote Sensing Portal, taking the best survey where they overlap (the same order reports use). Accuracy figures are from our own tests; see results by survey phase.
Each page shows the LiDAR coverage, ground levels, slope and mapped constraints for the town.
See a real example: Hillside plot by a burn, Strathtay (PDF).
| Full Site Report | £49 |
|---|---|
| Contours & CAD pack | £29 |
| Both | £59 |
Per plot up to 5 ha. The preview is free and needs no card. No VAT charged.
Yes. Published Scottish Government LiDAR covers about 100% of North Ayrshire. Surveys used: Scotland National LiDAR Programme, flown 2025–2026; LiDAR for Scotland Phase 6, flown 2022.
On open ground in our tests, typical height error is ±0.14 m for Scotland National LiDAR Programme; ±0.13 m for LiDAR for Scotland Phase 6. Each report gives the figure for your site.
£49 for the Full Site Report, £29 for the Contours & CAD pack, or £59 for both, per plot up to 5 ha. The preview is free.
0.5 m contours and spot levels across your boundary, slope and the fall from side to side, cut and fill for a level platform, mapped constraints with sources, and DXF files for CAD.
It depends on what your designer or the planning authority asks for. The report gives ground levels and contours for the whole plot. If walls, drains, trees or boundary features need measuring on site, that's a job for a land surveyor.
Aberdeen City · Aberdeenshire · Angus · Argyll and Bute · City of Edinburgh · Clackmannanshire · Dumfries and Galloway · Dundee City · East Ayrshire · East Dunbartonshire · East Lothian · East Renfrewshire · Falkirk · Fife · Glasgow City · Highland · Inverclyde · Midlothian · Moray · Na h-Eileanan Siar (Western Isles) · North Lanarkshire · Orkney Islands · Perth and Kinross · Renfrewshire · Scottish Borders · Shetland Islands · South Ayrshire · South Lanarkshire · Stirling · West Dunbartonshire · West Lothian
Council boundaries: Office for National Statistics, Local Authority Districts (May 2024), Open Government Licence v3.0. Contains OS data © Crown copyright and database right 2024. LiDAR: contains Scottish Government LiDAR data, Open Government Licence v3. See data licences.